Thingiverse
5w Fm Transmitter
door KF5ZBL
3
Downloads
5
Likes
0
Makes
This is a box I built for a 5W FM Transmitter I bought from Aliexpress. https://www.aliexpress.com/item/33012065189.html?spm=a2g0s.9042311.0.0.5eb54c4dFGmfNv
It was just a board and display and I needed to put it in something so this is what I designed. I hope you enjoy it.
I used brass standoffs for the main board and Nylon for the display. I also added a 50x50x10mm fan to help expel the heat off the heatsink. I soldered the fan to the power connector on the bottom of the board.
I also replaced the 3 buttons with a longer stem button.
It was just a board and display and I needed to put it in something so this is what I designed. I hope you enjoy it.
I used brass standoffs for the main board and Nylon for the display. I also added a 50x50x10mm fan to help expel the heat off the heatsink. I soldered the fan to the power connector on the bottom of the board.
I also replaced the 3 buttons with a longer stem button.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
