6 Cylinder Boxer Engine

The 6 cylinder boxer configuration is used by manufacturers like Porsche, Subaru and Lycoming (aircraft).The model comes with moving crankshaft and pistons. The crankcase cap is removable.Dimension: 96 x 143 x 61 mm.Weight: 0.14 kg.PrintingThe parts should preferably be printed on a smooth build plate.Avoid elephant foot and over-extrusion.I printed the model with PLA+ filament, layer height 0.16 mm. Printing and assembly in alphabetical order (A → K).Assembly The crankshaft cheeks are numbered from 1 -12. The arrows on the outside of the cheeks should be aligned and point in the same direction.Place conrod to 2. Glue 2 to 1. Bolt 3 to 2 with 2 bolts.Place conrod to 3. Glue 4 to 3. Bolt 5 to 4 with 2 bolts.Place conrod to 5. Glue 6 to 5. Bolt 7 to 6 with 2 bolts.Place conrod to 7. Glue 8 to 7. Bolt 9 to 8 with 2 bolts.Place conrod to 9. Glue 10 to 9. Bolt 11 to 10 with 2 bolts.Place conrod to 11. Glue 12 to 11.Now place the assembled crankshaft in the Crankcase, and close the Crankcase