6 Inch Knife Display

This print is designed to display a knife. It features:Wood grain texture6 inch spread between supports (center-to-center)7° slope35.5° blade tilt0.9 inch diameter handle cradleMagnet pocketsThe wood grain is achieved using a modifier and @PandaN's technique found here: https://makerworld.com/en/models/868884-add-wood-grain-effects-to-your-models-using-a-smal?from=search#profileId-820403. By moving the wood modifier around, a different wood grain texture can be created. The two supports are 6 inches apart from center-to-center. The knife rests at a 7° slope which makes the blade slightly lower than the handle. The blade tilt is limited to 35.5° and the cutout for the handle is a 0.90 inch diameter circle. There are 4 pockets in the bottom made for 6mm x 2mm magnets. The support can be left in place or easily removed to make room for the magnets. The magnets were a gentle press fit, but I added a dab of super glue to help make sure they don't detach.