$6 Nozzle Cam (*for Stealthburner)

Not wanting to spend a lot of money on something that doesn't directly improve performance I started looking around at different camera modules on Ali and came up with this. It is adjustable on 3 axes and should work with any stealth-burner tool-head that has ADXL mounting points. Electronics are about $6 or $7 depending on your setup and don't require you to chew open an endoscope if you just buy the camera module on it's own.Soldering is required. Tools needed: flush cutter, hobby knife and medium/thick CA glue (accelerator recommended for convenience.Hardware needed: 2 self tapping m2x10 screws, 2 button head m3x8 screws. Various bits of cable. Optional: 5v to 3.3v step-down, one or two neopixels (on a pcb).Print the required parts in the Voron standard settings ABS/ASA. 5v to 3.3v step-down converterCamera moduleI have not been able to find an alternate source for this camera module. Any endoscope camera should pretty much work, this one is 7.5mm in diameter and has sim