6" Rack, Raspberry Pi 3 Model B - ATX Input

A cabinet for KronBjorn's 6" rack: https://www.thingiverse.com/thing:1936196
Intended to be used with my ATX PSU cabinet here: https://www.thingiverse.com/thing:3352702

Made to house a Pi 3 with an ATX 24 pin power input. I'm intending to power the Pi off of the 5v standby pin and have the Pi turn the ATX supply on via GPIO. I designed this to be mounted upside down in the rack, so the wires going to the ATX plug don't lay on top of the Pi. Here's the pinouts for the ATX supply: http://pinouts.ru/Power/atx_v2_pinout.shtml Just make sure your PSU outputs enough amperage on the standby rail. Older ones only output a few mA, newer ones a couple of amps. My Corsair CX650 I intend to use outputs 3A on standby, plenty for a Pi.

https://ebay.us/BbGxdH Here's the panel mount 24 pin Mini-Fit Jr plug for the ATX supply.
https://ebay.us/yuKqJj And here's the male pins.

You'll need to crimp the pins onto a microUSB pigtail to power the Pi, and another to the signal line so the GPIO ca