Tank Extruder Mount (RigidBot, E3Dv6, Printrbot Gear Head)

Single extruder mount for a RigidBot. Uses the following parts: [RigidBot](http://www.rigidbot.com) [E3Dv6](http://e3d-online.com) Printrbot Gear Head Beta [Gear Head Extruder Mount](http://www.thingiverse.com/thing:589149) 2 - [50mm x 15mm radial fans*](http://amzn.to/1O1i60o) 4 - LM8UU Bearings [7W LED COB module*](http://www.dx.com/p/281536?Utm_rid=80235630&Utm_source=affiliate) (optional) 4 - 70mm M4 socket cap screws 4 - M4 nuts (preferably nyloc) 4 - 16mm M3 socket cap screws (for the motor mount) 1 - 8mm M3 socket cap screws (for the motor mount) 2 - 25mm M3 socket cap screws (for the extruder mount) 2 - 4mm M3 socket cap screws (for the extruder PCB) some 1.75mm NinjaFlex assorted wiring and connectors **affiliate links* Support: Do not add support material inside the main air ducts, it will probably be difficult to remove. I printed with support material around the screw holes and near the radial fan mounts but it can be printed without (those areas are hidden anyway). Materials: The flex top part was designed to be printed with a flexible filament, but can be printed in other materials {I'm currently using a rectangle of 3mm sobothane, but I don't think it makes a significant difference). The fan band should be printed in NinjaFlex or similar filament. I used PET+ for the main parts but I've also used PETG and PLA for some of the earlier versions. Warping from the heated bed or extruder may be an issue so ABS may be a better option if you can print it without warping. Assembly: There are 1.75mm channels for NinjaFlex or other similarly flexible filament, 3 around each bearing and 4 around the heatsink mount (16 total). The 30mm fan band goes around the E3D fan, which slides into the slot between the two main pieces (see picture). I tend mount the fan backwards so the air and fumes blow away from me, but it may work better with fan blowing at the heatsink (facing the heatsink is the normal E3D configuration and puts less strain on the fan wires). The LED mo