630Pin Breadboard Baseplate

A base plate for 630pin breadboards. Fit is very tight. Pockets are a little deep because I've left a little bit space under the rails and made cutouts between them. If you guys wanna solder and connect each rail together there is a way. I've left 2 long pockets either side of the print so I can have spares or a temporary storage for the stuff I'm working with. I've printed this one in no-name ABS, I keep my printer outside and since it is cold I've printed it with 10mm brim with no gap to object. I've used 3 walls, 25% gyroid infill (not recommended) and enabled supports for cutouts but it is not necessary. Print is on the heavy side, costing ~125gr of material, but it is sturdy and I think it will last a long time. InstructionsCut the tabs of off the pieces vertically, that way they come out much cleaner.File or sand all corners and break sharp edges. Insert power rails first. Insert one end half way in, hold the piece in the middle and bend the other side in,