Other STL Download - Working v8 engine desktop toyby LTS_Print1ng

This is a working v8 engine desktop toyYou must print 8 Piston Arms8 Piston Heads1 Handle 1 CrankShaft1 Engine BlockAnd 2 Crankshaft Clamps To assemble the engine just 1)Drill 4 holes in Engine block for securing the 'Crankshaftclamp'2)snap 'PistonArm's to the piston heads3)snap 'PistonArm's to the crankshaft (make sure the hook is hidden)4)tap the end of the crankshaft M4x0.7mm5)use 3x M4 flat washers as spacers between the crankshaft end and the handle6)secure the handle to the crank shaft with an 10mm long M4x0.7mm socket cap screw7)drop the assembled crankshaft into the engine block8)Screw on the clamps with self tapping screws9)(optional) using silicone based oil -> lubricate the cylinder walls, piston wrist, and crankshaft bearing surfaces10) turn the handle manually or use an electric screwdriver for the best effect.