Lighting & Lamps STL Download - boat navigation light. pole mount light.by designmyhobbies

This is a rear navigation light i made for my boat. it takes led 1156 bulb. you will need to get an 1156 bulb socket , very cheap, then run the wires through the small holes in the cup shaped piece and glue the bottom of the socket to the inside of it then let dry completely, then add your wire quick disconnect to the positive and negative wires of the socket. once complete slide the light up into the housing until its tops, about the length of the tip of your finger to the second knuckle on your finger. then run the wires down your pipe and press it onto the pipe until you feel it stop at the socket. this is made for 1156 led bulbs, regular 1156 wont fit. This is made to be printed with TPU flex filament which also helps keep it from breaking. print 12 layers top bottom sides, 45% or more infill, DO NOT USE SUPPORTS! it will fillup the inside of the light making it very difficult to get out, i made it to print great without it.