MINECRAFT TNT KEYCHAIN

I made a TNT Minecraft keychain with an anti-stress button. I added a 3MF file for multicolor printing and STL files for single color printing. You can make the STL file in two colors. Instructions for two-color printing for 200 micron layer height: - In the slicer settings, set the layer height to 200 microns - Set an automatic pause after 35 layers - Change the color to white and print from layer 35 to 75 in white - After layer 75, pause automatically and change the color back to red. The two color print will have white lettering, you can paint the lettering black with acrylic paints or marker or leave the lettering white. For this model you will need keyboard buttons, you can use buttons from an old keyboard or buy buttons from your nearest store or online stores. Also you need to buy a ring for key rings, you can get a ring from old key rings or buy it in the nearest store. Assembly of the model is not difficult, you just need to install the button inside the keyring, fix it, put the cover on and fix it, you can also use super glue for a secure fixation ( some types of plastic shrinkage is higher, so the button can not hold well and fall out )________________________________________________________ Don't forget to share your prints ________________________________________________________ If you have any problems, please email me ________________________________________________________ All my models are for personal use only ________________________________________________________ Don't forget to subscribe to me ________________________________________________________ All of my designs are protected by copyright law. Your purchase does not authorize you to distribute or sell digital files or printed models of my designs without my express written permission. If you want to get a commercial license and sell prints of my models email me. ________________________________________________________ 3D printing settings Layer height - 200 microns Walls - 2-3 Filling 15%