Free Other STL Download - Simple Turn Table for Scanning and painting work.by Cephas not of Rome

3D Printed Scanner and Painting turn table. Design Concept Easy to print with added requirements of 8 sealed bearings inner Diameter 8mm Outer Diameter 22 mm by 7mm wide. Bearings press fit over ends. Print settings K2 Printer, standard presets for PETG PETG 75 - 95% Infill Basic support at 30 degrees No raft or brim required. Assembly Add 6 bearings (22mm OD x 8mm ID x 7mm wide) to ends of the six shafts, press firmly over the slotted area of ends. Test fit to ensure bearings are fitted correctly. Add another 2 identical bearings with some epoxy to bottom and top wheel surface centres and let dry ensuring glue on outer rim only to allow free rotation. Fit centre shaft 8mm and press together - Glue shaft optional.