6x6轮式机甲火箭炮（轮子炮塔可动，无需五金）

此款战车是我原创设计的6x6轮式战车系列第二款，名为轮式火箭炮，采用6x6通用底盘，原来的炮塔换成8联装中程火箭弹，可实现快速换装，车身标配一座双加特林机枪组成的自卫炮塔用于自身防护，后4轮采用高功率电力驱动，尾部的的涡喷口改成扇热孔，可实现静音行驶。。。。。（以上是我对这辆车的幻想，哈哈哈哈）当然，你也可以把火箭巢拿起里，把模型当成笔筒用也可以。 其他款可点我主页寻找！ Other models can be found on my homepage! 用到的工具（tool）： 胶水（glue） 尖嘴钳（Point-nosed pliers） 注意事项（Things to note）： 本模型零件较多，打印前请清洁打印板，做好耗材烘干； This model has many parts. Please clean the printing board before printing and dry the consumables； 除轮胎和底座转动部分外，其余部分均需要用胶水固定； Except for the tire and the base rotating part, the rest need to be fixed with glue; 请按照说明书安装； Please follow the instructions to install; 火箭发射塔转动部分是由限位卡口固定，经常上下转动的话容易松，可以采用petg材质打，当然pla也能用（寿命比较短）； The rotation part of the rocket launcher is fixed by the limit bayonet. It is easy to loosen if it rotates up and down frequently. It can be made of petg material, and of course the Pla can also be used (the lifespan is relatively short); 新增了一个专门支撑火箭槽的支架，用于支撑过重的火箭巢，可避免因未太重导致卡口过早松动； A new bracket specifically supports the rocket groove is added to support the overweight rocket nest, which can prevent premature loosening of the bayonet due to not being too heavy;