7.5" 3D Printable FPV Drone

Yes, a 7.5" 3D Printable FPV drone, hard to beleive such a big drone can be printed, and fly (somewhat) well! This has taken me almost 2 years to design, and $1500 aud in plastic and parts for this You will need to buy 2.5mm steel rods at any length This drone weighs around 1kg to 1.5kg, so (depending on your country) you might need to register it. The weight of this drone does not mean it flies horribly, in fact, it can lift around 11 kg, including the frame. and it packs a punch at full throttle. WARNING! This can be an extremely dangerous drone as it is not 100% stable, it CAN cause alot of harm to you or others, but if you use it correctly, it will not do any of the sort Print settings: (print out of Pa6-cf) - Print the body with 50% infil, and 6 walls, 6 top and bottom shell layers, and support from the build plate in tree support - Print the arms with 35% infil, 5 walls, 5 top and bottom shell layers, and support from the build plate only in tree support - Print the camera mounts