7 inch screen case

This is a case I made for this 7" display I bought on Amazon: https://www.amazon.it/gp/product/B0751B75GQ/ref=ppx\_yo\_dt\_b\_asin\_title\_o06\_s00?ie=UTF8&psc=1 The display is a 7" touch screen from GeeekPi. You may be able to put your own display if it has the same dimensions. The model has a few parts: The Front Frame, which goes in front of the display. The display is fully visible and it's thin, so it's possible to use the touch screen without problems. The Back Frame, which olds the display in position, you may need to use a bit of hotglue. On the back of the display there are some holes for the backplate, some pins to put in position the 3 controller boards of the display: the video controller, the touch controller and the buttons. The backplate is used to cover the boards, it have 5 holes for the buttons extension, a cut on the top to access the ports on the video controller and a little cut on the side to access the micro usb port for the touch controller; the