Slicer Discord
7’’ Raspberry Pi Screen Stand – 3D printable model from MakerWorld MakerWorld
Electronics

7’’ Raspberry Pi Screen Stand

209 Downloads
55 Likes
105 Makes
Go to Model
This is based off another mount that I thought would work, as it turns out it didn't, I got this far no turning back now. So I set out to redesign the mount to work for my screen (link below) decided making a bezel to finish it out would be a good deal too, make it look like a desktop monitor. I think it worked out nice. The bezel is press fit but you will need some screws to finish this model out. I'll list all that below. Screen : https://www.amazon.com/gp/product/B07VNX4ZWY/ Note: In the model are 4 standoffs, you need these to clear the components on that screen when installing the mounting bracket. 2x M3 nutsert (can be glued instead) 2x M3 screws (also not needed if glued) 4x M2 x12 4x M2 Nuts
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection