7 Segment Clock

Printing SettingsThe printing is optimized for the following options:0.32 First layer height0.24 Layer height0.44 Layer width Notes:Each element fits using dovetail joints, so it is necessary to check tolerances accurately. The parts come with a clearance of 0.1mm. Each segment contains a small rail for the LED strips. This rail serves for centering and prevents the strips from sticking. However, it can be removed to glue them.The trickiest part of the design is soldering the LED strips. It's not very complicated, but it could be a small issue if you lack experience because there isn't much space to work with.The model can be scaled using the Fusion360 project to obtain smaller or larger segments (Not tested) Materials1 x ESP32 WS2810B 30 Leds per meter (Each digit contains 2 leds plus two dots)1 x DC Conector 5mmx2.1mmWires to connect each led strip (20AWG) PARTS (One digit)2 x Top_Bot Segment1 x Center SegmentFor the digits on the ends:2 x Vertical Segment End1 x Top Left Bot