7-segments clock desktop and hanging support

[EN] Designed some supports for this project:
https://hackaday.io/project/169632/gallery#577f40e6a0bbad275931f0e1334fd141
I'm not the author of the electronics, but once implemented, designed a couple of desktop supports and one hanging support.
The most complete desktop support consist of:
1 x Desktop-right-side, 1 x Desktop-left-side, 2 x Desktop-Upper and 2 x Desktop-Under.
You will need a 400 mm M3 threaded rod and 4 M3 nuts to keep it tight.

There's another model called Desktop-one-piece, that will just hold the clock.

The model called Hanging-one-piece, allows to hang it up on a wall using 1 or two M4 screws.

There's an extra piece called Short support just in case you want to make your own design.
Hope you like it and let me know your opinion.
--------------------------------------------------------------------------------------
[CAT] He dissenyat uns suports per aquest projecte:
https://hackaday.io/project/169632/gallery#577f40e6a0bbad275931f0e1334fd141
No so