Thingiverse
70mm EDF Housing
par asr93
32
Téléchargements
30
Likes
0
Makes
After breaking my FMS 70mm EDF housing I decided to print my own.
It's currently installed on a FMS Avanti.
This is the original EDF with the motor:
https://www.banggood.com/FMS-70mm-6S-12-Blades-Ducted-Fan-EDF-Unit-With-2860-1850KV-Brushless-Inrunner-Motor-p-1115122.html?p=WG04118353142201701U&custlinkid=506320
If you decide to print and use this EDF housing I recomend to print in the orientation shown in the picture to make it easier to remove completly the support material from the inside.
Also use high infill since it has to hold arround 2.4Kg of thurst.
It's currently installed on a FMS Avanti.
This is the original EDF with the motor:
https://www.banggood.com/FMS-70mm-6S-12-Blades-Ducted-Fan-EDF-Unit-With-2860-1850KV-Brushless-Inrunner-Motor-p-1115122.html?p=WG04118353142201701U&custlinkid=506320
If you decide to print and use this EDF housing I recomend to print in the orientation shown in the picture to make it easier to remove completly the support material from the inside.
Also use high infill since it has to hold arround 2.4Kg of thurst.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !