747 Takeoff Hueforge

Project: 747.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 175x95mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mmFilaments Used: PLA Black Transmission Distance: 0.3 PLA Red Transmission Distance: 4.5 PLA Orange Transmission Distance: 5.6 PLA Yellow Transmission Distance: 6.2 PLA White Transmission Distance: 2.5 transmisson distances from a TD test print, not TD1, may not be accurateThis print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #14 (1.2mm) swap to Orange At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to White for the rest. Being lazy with an AMS, i put the white for layer 23 as black when slicing it to keep it 4 colours, then i put a pause in at layer 15 and then swap the black to white and have the 5 colour print.