WTC Foldable Multilevel Ruins - NuGoth Imperial

⚠️ Make sure your printer has a printing volume of at least 205x220x231mm to make sure you can print the files! (Bambulab A1, P1S and Ender3 are fine). For this print, having tight tollerances is crucial, if you are not sure if you can print print-in-place mechanisms, check the CALIBRATION FILE. This Object only supports the "tight" version (0,35mm tollerance). ⚠️ Non-manifold / floating regions warning The non-manifold or floating regions warning can be safely ignored. Still, always check the toolpath preview before printing, just to make sure your slicer is not doing anything unusual. This warning appears because the files are built from multiple closed meshes, and some of those meshes share coincident triangular faces so the multicolour geometry lines up correctly. That can trigger a non-manifold warning, but slicers handle it cleanly and it should not affect print quality. The floating regions are also intentional. Most of them are bridges required for the preassembled hinge mechan