MyMiniFactory

Physically Simulated Wall Ruin with Rubble and Debris Scatter Presupported

by Slab Terrain

0 Downloads

1 Likes

0 Makes

This wall ruin has been physically simulated using the same CGI techniques VFX artists use in the film industry to achieve an extra level of realism. Test printing was performed using a resin printer (Anycubic Photon Mono m5s) and the presupported model is also included. The process took approximately 6.5 hours with a layer thickness of 0.05 mm and an exposure time of 3 seconds, using Anycubic ABS-like 2.0 resin. I cannot guarantee successful FDM printing, as I have no way to test it.

brick building city concrete D&D debris destroyed DnD rubble Ruin ruined scatter tabletop terrain wall wargame wargaming warhammer wartorn wh40k

Source

MyMiniFactory

Published

11.05.2026

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS

Est. print time

6.5 h

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Physically Simulated Wall Ruin with Rubble and Debris Scatter Presupported

Similar Models

Add to Collection