Thingiverse
7x16 Wasp
door nmaggioni
9
Downloads
6
Likes
0
Makes
Simple & lightweight custom frame for 7x16mm brushed motors, Eachine's E010S flight controller and AIO camera/VTX.
Use [my remix of Knifa's mount](https://www.thingiverse.com/thing:2677127) to keep the camera in place; you could as well use a strip of double sided tape in case of need. Use a rubber band to keep the battery pressed against the center plate.
### Features
+ Weights ~3.0g
+ 80.5mm shaft-to-shaft distance.
+ 25.5mm _(side)_ / 36mm _(diagonal)_ FC mounting holes.
+ Up to 55mm wide props.
+ No battery dimension limits.
+ Centrally placed FPV camera.
+ Design optimized for **0.3mm layer height** and **25% Honeycomb infill**. _Two top/bottom shells are suggested._
#### Updates
+ **V2**: Improved crash resistance _(stress relief on critical junctions)_
+ V1: Initial release
---
Source available in [this OnShape document](https://cad.onshape.com/documents/d6c6d0d447c8c3ea78e7ef4e/w/206ce5b2a112eb6f6f78bfb7/e/9c293e87a256d25ac6dccf37).
Use [my remix of Knifa's mount](https://www.thingiverse.com/thing:2677127) to keep the camera in place; you could as well use a strip of double sided tape in case of need. Use a rubber band to keep the battery pressed against the center plate.
### Features
+ Weights ~3.0g
+ 80.5mm shaft-to-shaft distance.
+ 25.5mm _(side)_ / 36mm _(diagonal)_ FC mounting holes.
+ Up to 55mm wide props.
+ No battery dimension limits.
+ Centrally placed FPV camera.
+ Design optimized for **0.3mm layer height** and **25% Honeycomb infill**. _Two top/bottom shells are suggested._
#### Updates
+ **V2**: Improved crash resistance _(stress relief on critical junctions)_
+ V1: Initial release
---
Source available in [this OnShape document](https://cad.onshape.com/documents/d6c6d0d447c8c3ea78e7ef4e/w/206ce5b2a112eb6f6f78bfb7/e/9c293e87a256d25ac6dccf37).
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
