8.5 mm Brushed Quad

This is a quad frame for 8.5mm brushed motors and has a shelf for an FPV camera housing.
Two versions: one with wire cutouts so you don't have to un solder your flight controller and motors. and one version with tighter motor mounts so they will never come loose. I have only tested the v3 frame. v4 is for when i crash, but I haven't broken v3 so why go to v4?!


My weight is about 64g with a 720mah 20C battery.

I used the Crazepony 200mw FPV camera.

All Parts are from Amazon:
8.5 mm hubsan generic motors must be H107D or C motors not L (L is 7mm motors)
syma 5c version 5 flight control board
crazepony 200mw FPV camera
720mah 20c battery

Flight time is about 5 minutes of great FPV. My only issue is the way the syma flight board controls the throttle. 10% throttle rockets the drone upwards. 100% same thing. and decrease from 100% does not result in descent. In a large field and minimal wind its fun to fly. Something to get you into fpv.