8 color Printing / 8色輸入

請準備2顆M2螺絲, 8-10MM Please prepare 2 M2 screws, 8-10MM. 建議列印層高低於0.1, 繞圈3以上, 填充40% It is recommended to use a layer height of less than 0.1, with more than 3 perimeter loops, and a 40% infill. 除了推薦更堅固的打印要求, 也增加了更大範圍的支撐力 In addition to recommending stronger printing requirements, it also increases a wider range of support. 以抵抗高速移動時, 8條喉管本身的阻力 To resist the resistance of the 8 hoses themselves during high-speed movement.