Thingiverse
80mm Adjustable Fan Stand
by msam1300
7
Downloads
7
Likes
0
Makes
Hi team, this is version 1 of the 80mm Fan Stand I created after searching for tens of solutions here on Thingiverse. I will be creating and uploading a 120mm and 140mm versions as well. Please check back soon for links to those.
Tools:
M4 screws for fan - M4 x 10 (x4)
M4 screws for stand - M4 x 12 (x2)
The print is designed to not require any M4 nuts but depending on the length of the M4 screws you use, these may be required.
Print settings:
Nozzle: 0.4mm
Quality: 0.2mm (up to you really)
Walls: 3
Top/Bottom: 3
Infill: 10%
Material: Any (I used PLA)
Build plate adhesion: not required but I use Brim
Enjoy!
Tools:
M4 screws for fan - M4 x 10 (x4)
M4 screws for stand - M4 x 12 (x2)
The print is designed to not require any M4 nuts but depending on the length of the M4 screws you use, these may be required.
Print settings:
Nozzle: 0.4mm
Quality: 0.2mm (up to you really)
Walls: 3
Top/Bottom: 3
Infill: 10%
Material: Any (I used PLA)
Build plate adhesion: not required but I use Brim
Enjoy!
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
