8up Shotgun Shell Caddy

UPDATE 4/18/2017
I have gone through a couple revisions of this. The current version is rev3, which is making much better use of space and leaving a much smaller footprint. I also uploaded the .iges files so if anyone would like to modify them they can.


This is my try at a shotgun shell caddy, as used by many multi-gun competitors. This is not to be used for commercial purposes.

You will need:
8 - M4x20mm Machine Screws
8 - M4 Nuts
4 - 1/2"x 1/16" magnets (http://www.kjmagnetics.com/proddetail.asp?prod=D81-N52)
1 pack of rubber bumpers (http://www.mcmaster.com/#9310k12/=13rn8to)
1 TekLok mount (if that is what you want to use)
Super Glue

3D Printed Parts:
Material: ABS
One of each: 8_up_body, 8_up_front, 8_up_back
Layer Height: 0.2mm
Infill: 30%
Shell thickness: 1.0mm
Bottom/Top thickness: 1.0mm

Instructions:
- Print the parts.
- Press the M4 nuts into the slots, you may need to use a hammer and a punch to tap them in to place.
- Glue the magnets