8x8x8 LED Cube Case

This is an alternate case design for the Geekreit 8x8x8 LED cube display, purchasible from banggood (https://www.banggood.com/Geekcreit-8x8x8-LED-Cube-3D-Light-Square-Blue-LED-Flash-Electronic-DIY-Kit-p-1055438.html)

This design differs in that you do not need to disassemble (and part-desolder) the LED array before assembling the case. Making adjustments and repairs _much_ easier.

Also included is a 8x8 LED positioning jig so you can get your LEDs positioned _just right_. See the pictures for an in-use example.

_SCAD files included_, so you can tweak things like the shape of the power button cut-out, etc.

## Tips

* Once all the LEDs are soldered into the jig, you'll need to flex/warp the jig back and forth to slowly release the LEDs

* The SCAD file was cleaned up a little after printing the case as displayed. Everything aligned up in the resulting model, but there's a chance something might not come out right.

* The screw holes are intended to be used with M3 screw