90's Geometric Bookmark

This was my second, and after playing with the colors, I decided I wanted it to give off that 90s vibe. There is a negative shape in the print that allows for a hole on the top to put a tassle. It can be removed before slicing if you don't need it. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50.02x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Elegoo Blue Transmission Distance: 2.7 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite Pro Magenta Transmission Distance: 1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue At layer #14 (1.2mm) swap to Savannah Yellow At layer #19 (1.6mm) swap to Magenta for the rest.