9mm Remix case feeder with mods

I've spent over a month building the original 223/308 design and making a 9mm conversion kit for it and spending a lot of time testing out my designs. included is a newly designed 9mm wheel and appropriate core. This wheel is designed to be used with the recessed pocket side facing up (not the smooth side) to aid in constantly moving brass around.

l also Improved Case feeder drop tube that works with 9mm, 223, 308. This has a improved location for photocell and led so if a case jam happens, it stops the motor within 2 shells before they back up. A viewing port that allows a simple paperclip or zip tie to be inserted to lift cases and adjust in the unlikely situation of a jam and they drop free.

The new drop tube will snap right onto the dillon clear case feeder tube. I also was able to utilize the original dillon s bent case feeder support pipe to hold this case feeder. basically you have to drill 2 new holes in the metal tubing aprox 3/8" above the original holes and a slight