A Samurai Quest

This is a 6-color print Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 174.4x220.12mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #17 (1.44mm) swap to Jade White At layer #18 (1.52mm) swap to Gray At layer #19 (1.6mm) swap to Blue Gray At layer #25 (2.08mm) swap to Red At layer #30 (2.48mm) swap to Orange for the rest. Boost MeIf you like this print please give me a boost thank you.