A Study in Black and White #93

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.97697mmFilaments Used: #1c1c1c PLA+ Numakers Midnight Gray Transmission Distance: 0.2 #52595d PLA+ Numakers Dark Grey Transmission Distance: 0.5 #747474 PLA+ Numakers Simply Silver Transmission Distance: 0.5 #8c969d PLA+ Numakers Light Gray Transmission Distance: 0.7 #e6baa8 PLA+ Numakers Apricot Transmission Distance: 4.7 #e6d2b5 PLA+ Numakers Ivory White Transmission Distance: 4 #f1ece1 PLA+ Numakers Pure White Transmission Distance: 3.3 #ffffff PLA+ Numakers Cool White Transmission Distance: 1.8This print uses 8 unique filamentsSwap Instructions: Start with Midnight Gray At layer #17 (0.8mm) swap to Dark Grey At layer #20 (0.92mm) swap to Simply Silver At layer #24 (1.08mm) swap to Light Gray At layer #26 (1.16mm) swap to Apricot At layer #3