A1 grips

A1 grips

These are pretty thin and you are going to want to thicken them before printing. When making them thicker extrude the smooth side because this is the side that meets the frame. Don't do the other side it probably break the model. Also keep in the mind the grip screws when making them thicker. if you need to deepen the screw hole for any reason the hole is 6mm Diameter.

You will probably have to clean/shave the print to get it to fit on some frames.

filament: polymaker polyflex
Print speed: 35mm
infill: 25%

Any questions/Issues message me