A1 mini simple foot base

This 3D model is a simple "foot" component.Instead of attaching adhesive anti-vibration pads directly to the A1 mini, you can attach the pads between this foot and the desk.By placing the A1 mini on top of the feet, the device can be lifted easily without disturbing the pads, which are often difficult to reposition once stuck.This improves maintenance accessibility and makes lifting or servicing the device much easier.The design supports anti-vibration pads up to 50mm in width and depth (square pads up to 50mm × 50mm).Commercially available anti-vibration pads can be used for this setup.To prevent the A1 mini from slipping off, it is recommended to use adhesive (sticky) anti-vibration pads. Note: One of the four feet has a smaller corner radius (R) than the others.This particular foot is designed to fit under the LCD section of the A1 mini, so please place it accordingly. The image shows the A1 mini placed on top of the feet, which are mounted on a stack of three 40mm × 40mm an