Thingiverse
A30M geeetech double blower duct
7
Download
10
Likes
0
Makes
still working on this and currently printing 2nd fix model...hope it works!
will switch to PETG and 0.12LH once signed off
no supports needed
2 of the stock bolts will be too long if wanting to use plus cannot get two bolts in (one each side)
need 4 more M2.5 x 6mm bolts to put in 6 holes....cannot access 2 of them, 1 either side....
printed 0.2 LH 20% infill.......seems to work well...might print with PETG at a later date but seems far enough from nozzle not to melt yet
will switch to PETG and 0.12LH once signed off
no supports needed
2 of the stock bolts will be too long if wanting to use plus cannot get two bolts in (one each side)
need 4 more M2.5 x 6mm bolts to put in 6 holes....cannot access 2 of them, 1 either side....
printed 0.2 LH 20% infill.......seems to work well...might print with PETG at a later date but seems far enough from nozzle not to melt yet
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
