Aamram model rocket, 18mm

This is a scale version of the military Aamram air to air missile. Or at least as close to scale as I can make it.

In addition to the parts listed here you will need:
* 30cm of BT-55 body tube (33mm diameter) for the bottom body
* 24.6cm of BT-55 body tube (33mm diameter) for the top body
* 7cm of BT-20 body tube (18mm) for the motor tube.
* An 18" parachute
* Shockcord (I use kevlar line)

Note, the taller conduit pieces have both a "supported" and regular version. The supported versions will print cleaner, but you'll have to snip off the reports.

Instructions
1) Glue the motor tube to the mmBottom piece so the tube is flush with the bottom (which is the narrower end)
2) Glue the motor tube to the engineblock piece, which also forms the top centering ring.
NOTE: the engineBlock piece has a hole in it. This is so you can run kevlar line through it, which you can then tie around the motor tube. The other end of this line can run out the body tube to form the shock co