AAP01 KIT EAGLE'S EYE (AIRSOFT)

This AAP01 kit solves most of the problems that you may find in other models from other creators, for example, the misalignment and tilt of the hop chamber and barrel has been fixed, and the print marks have been brought to a minimum. This has been done by having to embed the barrel in the exit hole of the front thread, forcing the barrel to maintain a straight trajectory while having the option to use any suppresor, or tracer unit you want. The kit includes: Frontal with -14mm thread Receiver Muzzle Loading lever Front sight Hardware needed: 2 M3x5mm (For the front shight) 1 M5x10mm (For the charging handle) 2 M4X5mm Inserts (For the RMR attachment) If you find any errors, do not hesitate to contact me and I will try to solve them as soon as possible. UPDATE 07/02/2025: - The holes for the RMR have been updated, now you can put more easily an M4x6(width)x5(long)mm. - The holes for the rear sight have been updated, so now you can install an M3x4x3mm insert to have better resistance on the rear part. If you want to sell prints of this model, please, contact me. I recommend using PLA because the piece has been engineered thinking in printing with that material. But you could try with any other. IMPORTANT: 0.15 Layer height on the frontal, to get holes done perfect. The rest can be printed at 0.2mm Supports: Normal/Tree Everywhere 70% angle Infills: - Frontal -> 30% - Receiver -> 50% - Muzzle -> 30% - Loading Lever -> 35% - Front sight -> will be printed solid in every config