AC K3 Spool Relocator Bracket + Clip

What made me develop this? I originally tried to print TPU on the AC K3 but prompted me to print on an external spool holder that they provided which was located at the back of the printer that slid into the designated spot.   The problem with this design was heavily flawed, as soon as the print tried to calibrate the build plate automatically it would immediately hit on the spool which was definitely an issue with their original design. I've designed a bracket clip that uses the original parts that were provided with the machine and created a flush fit that slides seamlessly into the frame and uses a single clip to lock with ease. The original spool bracket just slides in tightly onto the printed clip and can be locked/unlocked with one clip. I've personally tested this for a few days and it doesn't move at all when mounted. Version: 1.1 N/A     Please remember when adding/removing a new spool, you may want to use vibration compensation again to recalibrate the machine after adding/removing a spool.  IMPORTANT NOTE: YOU WILL NOT GET THE ENTIRE PRINT VOLUME ON THE VERTICAL AXIS. WHEN NOT IN USE, YOU MUST REMOVE TO GET THE FULL PRINT VOLUME, BEWARE AS IT WILL HIT THE SPOOL IF THE PRINT IS BIG.