Acceleration Jerk Calibration Tower

[ If you like my model(s), please visit this page https://www.facebook.com/neorisKir/ and set "Like" to it! You will help me more than even giving a tip. Thanks in advance! ]

It's the calibration tower for acceleration/jerk.

I recommend to proceed this test before calibrating Linear Advance. So your LA will be made for the best acceleration value.

The .gcode file is for Flash only!!! Anyway I don't guarantee that it will be printing fine on your concrete Flash.
The temperature (in gcode) is set to 247 C !!! I've made the gcode for my PETG.
Please, edit the file if you're going to print with PLA!!!
You'll find lines:
M104 S247 ; Set Extruder temperature
M109 S247 ; Wait for Extruder temperature
Just change S247 for a temperature you want!

HOW_TO:
Slice it without the Top shell (Top = 0), 1 line for Walls, no Infill. Use a speed that you'll be using almost always (the highest but without noticeable artifacts).
Then use Notepad++ editor (on PC) and search for every 5x