Accessible Wade's Extruder

Nothing to see here. You really want version 3: http://www.thingiverse.com/thing:8252 (although this is still a good reference for the benefits of the accessible aspects.

**Version 2 now uploaded**. Generate STLs from the version 2 scad to get the version 2 changes. NOTE: To do this you must have configuration.scad from the prusa git repo in the same directory as gregs-wade-v2.scad so that bolt and nut sizes defined in that file can be used.

This is an extruder based strongly on the wades from the Prusa git repo. It has several features over the standard wade:

1. Accessible hobbing. If you strip the filament, there is no need to disassemble in any way (such as removing the idler/filament or bolt) in order to remove the stripped plastic from the hobbing. You can get a needle in the hole in the top and scrape it out.

2. The motor can be removed without removing the large gear. The three mounting screws can be accessed without removing the gear. 2 of them are clearly accessibl