Thingiverse

Acetech AC6000BT Sensor Shield

by JerryMiculek

5 Downloads

7 Likes

0 Makes

A replacement sensor shield for when the factory one cracks or chips from being shot and lets too much light into the sensor area.
This part can work even if the sensors on your board are damaged/broken (not too many, or reading will be spotty.)

This part is designed for the MKI version of the AC6000BT and I do not have A MKII or MKIII version to test compatibility with. If you do test the fitment with a MKII or III please let me know what the result is.

This replacement is one piece and should print vertically with supports, resolution is unimportant. Print pictured is out of Matterhackers PETG at .3mm Layer Height. Be sure your horizontal hole expansion is tuned in your slicer or the shield will not fit over the metal ring.

AC6000 AC6000BT acetech airsoft chronograph fps replacement

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

print-in-place design · supports needed · 0.30mm layers

Print-in-place Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG, HIPS

Min. bed size

50 mm (Small)

Layer height

0.3 mm

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Acetech AC6000BT Sensor Shield ?

Any FDM printer should handle Acetech AC6000BT Sensor Shield just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Acetech AC6000BT Sensor Shield need supports when printing?

Nope — Acetech AC6000BT Sensor Shield is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Acetech AC6000BT Sensor Shield available in?

Acetech AC6000BT Sensor Shield is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Acetech AC6000BT Sensor Shield free to download?

Yes, Acetech AC6000BT Sensor Shield is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Acetech AC6000BT Sensor Shield

Similar Models

Add to Collection