Thingiverse
Acrobrat - Hatchback Mount
di TheDronanaut
36
Download
30
Likes
0
Makes
This is the Hatchback mount I designed for my Acrobrat.
https://rotorbuilds.com/build/14408
I've spent more money than I would like to admit on antennas. So keeping them as tight/protected as I can is a high priority. This seems to give a good balance of signal quality and protection.
The Immortal T antenna mount is a "Clamshell" style mount. This makes replacing the antenna a breeze. I had some coarse 1.6MMx9MM Button head screws from some Runcam parts(I think?). Anything should work as long as it coarse enough to bite into the TPU.
The XT60 mount is SUPER tight. I print with 100% infill and you practically have to press fit it in. This was on purpose and holds well without the need for any adhesives or glues.
* Print with Support material.
* Print with .2MM line height.
Finally, check out my other Acrobrat parts!
BEEPER MOUNT
https://www.thingiverse.com/thing:3108401
CAP MOUNT
https://www.thingiverse.com/thing:3108384
My Acrobrat Flight Footage:
https://rotorbuilds.com/build/14408
I've spent more money than I would like to admit on antennas. So keeping them as tight/protected as I can is a high priority. This seems to give a good balance of signal quality and protection.
The Immortal T antenna mount is a "Clamshell" style mount. This makes replacing the antenna a breeze. I had some coarse 1.6MMx9MM Button head screws from some Runcam parts(I think?). Anything should work as long as it coarse enough to bite into the TPU.
The XT60 mount is SUPER tight. I print with 100% infill and you practically have to press fit it in. This was on purpose and holds well without the need for any adhesives or glues.
* Print with Support material.
* Print with .2MM line height.
Finally, check out my other Acrobrat parts!
BEEPER MOUNT
https://www.thingiverse.com/thing:3108401
CAP MOUNT
https://www.thingiverse.com/thing:3108384
My Acrobrat Flight Footage:
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
