Activated Carbon Filter Replacement

This is the best of both worlds from two very good models. The combination of the two creates an exceptional Activated Carbon Filter for the X1C that can be filled with carbon pellets to filter out Volatile organic compounds (VOCs) from printing with certain filaments.Used the stl files (without the modifiers) from @CNCKitchen and the printer settings from @ktek_296200. Printer settings are as follows:Quality 0.20mm Standard @BBL X1C (0.24mm should be fine too)SettingsQuality:Only one wall on top surfaces = OFFStrength:Wall loops = 5 or 6 (depends on infill pattern)Top shell layers = 0Bottom shell layers = 0Sparse infill density = 25% or higher (I used 50% - Honeycomb)Sparse infill pattern = Aligned Rectilinear OR Triangles OR Honeycomb (AKA Bestagons) OR Grid.Infill/wall overlap = 20%Infill direction = 0 or 90 degreesAny infill that doesn't cover the holes basically all work, feel free to play around with the density with different patterns depending on your carbon pellet sizes.I