AD5X Filament Roller Guide

A filament roller guide plate that mounts under the IFS attachment bracket. Uses four 5x25.5x8.5mm u-groove roller bearings (https://www.amazon.com/dp/B0CQJT7GMG). Requires 2pcs M3x30mm to replace the original IFS bolts if you have the enclosure kit installed or M3*25mm without enclosure, and four M5*10mm socket cap bolts to mount bearings. The holes for the roller bolts will need to be tapped after printing. I designed this to reduce the feed angle of the filament from the spool to the IFS inlet tubes, especially when using softer plastics like TPU-72D, hopefully preventing any kinking or jams. Has tabs to prevent the filament from popping off rollers. 8" standard spools clear the bearing on station 4. To mount/unmount IFS, either the filament will need to be unloaded or the bearings removed to prevent the filament from breaking. Will be trialing this to see if any modifications are needed and wouldn't mind any feedback from anyone who prints one for their machine. Enjoy!