Thingiverse
Adafruit Macropad Case
par toasto
10
Téléchargements
11
Likes
1
Makes
Case for the Adafruit Macropad (https://www.adafruit.com/product/5100)
-Top layer acts as keyplate.
-6degree typing angle.
-Props up the oled so that it's more visible (need to detach oled from pcb somehow first).
-Requires 4x30mm countersunk m3 machine screws and 4xm3 nuts.
I've not printed or built this yet so try at your own risk. :)
Updates:
12/2021 - Changed plate and case tab thickness from 2mm to 1.5mm to match Cherry switch spec and cleaned up bottom case reinforcements to be flush with plate.
1/2021 - Added access to reset switch and STEMMA QT Connector via bottom case.
-Top layer acts as keyplate.
-6degree typing angle.
-Props up the oled so that it's more visible (need to detach oled from pcb somehow first).
-Requires 4x30mm countersunk m3 machine screws and 4xm3 nuts.
I've not printed or built this yet so try at your own risk. :)
Updates:
12/2021 - Changed plate and case tab thickness from 2mm to 1.5mm to match Cherry switch spec and cleaned up bottom case reinforcements to be flush with plate.
1/2021 - Added access to reset switch and STEMMA QT Connector via bottom case.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
