Thingiverse
Adjustable 3D Printer Feet
par mparker03
39
Téléchargements
24
Likes
0
Makes
Adjustable 3d printer feet.
Fit 4040 rails.
10mm height range.
40 x 40 x ~18-28mm
Printed on a stock Voxelab Aquila. Clearance on the threads is .275mm. I needed to work the threads together a little to get smooth operation but they adjust smoothly after working them. Wait until they are fully cooled.
Flat feet so you can attach padding/damper to the bottom.
The rear body was designed to fit with the power source in place on my printer. The short nub is 23mm in length.
I used double sided tape on the top face to stick them to the rails.
Fit 4040 rails.
10mm height range.
40 x 40 x ~18-28mm
Printed on a stock Voxelab Aquila. Clearance on the threads is .275mm. I needed to work the threads together a little to get smooth operation but they adjust smoothly after working them. Wait until they are fully cooled.
Flat feet so you can attach padding/damper to the bottom.
The rear body was designed to fit with the power source in place on my printer. The short nub is 23mm in length.
I used double sided tape on the top face to stick them to the rails.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
