Thingiverse

adjustable bath tub plug

by NitzscheModellbau

22 Downloads

17 Likes

0 Makes

This is a printable bath tub plug that is adjustable in length. You could maybe print the sealing ring with flexible filament or use a standard sealing ring. The thread is M6 so you can also use a chopped M6 screw (brass). I have printed the plug rotated 90 degrees sideways with support from printbed in PETG.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required Hardware needed

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PETG

Min. bed size

50 mm (Small)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for adjustable bath tub plug?

Any FDM printer should handle adjustable bath tub plug just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does adjustable bath tub plug need supports when printing?

Yes, adjustable bath tub plug will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is adjustable bath tub plug available in?

adjustable bath tub plug is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is adjustable bath tub plug free to download?

Yes, adjustable bath tub plug is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

adjustable bath tub plug

Similar Models

Add to Collection