Adjustable Drawer Divider-Spacer

Adjustable Drawer Divider-Spacer The stl are in modules of 20 mm to adapt to your drawer and printer. Dividers various measures, to modify the divisions of any drawer, can be joined by the piece, can be cut to get different measures. It has several preset modules, to achieve the desired divisions, each in variations of 20 mm. The height of the standard spacer is 70 mm , but you can scale on the Y-axis , what you need , it will scale and work equally . If your drawer is for example 40 mm high, you should scale the Y-axis 0.57 (40/70).If your drawer is e.g. 100 mm high, you should scale the Y-axis 1.43 (100/70). The thickness of the spacer is only 2 mm, but if it is a large drawer, you can scale by 1.5 in all axes, and you will get spacers of 3 mm, or scale 2 mm and you will get strong spacers of 4 mm, attention then the divisions will be of 30 mm or 40 mm between them. I hope you like it , applicable to kitchen drawers , but also small clothes drawers , and other modules . I hope you like it.