Slicer Discord
3DSEARCH / Other House Models / Adjustable Folding Hook
Adjustable Folding Hook – 3D printable model from MakerWorld MakerWorld
Other House Models

Adjustable Folding Hook

by Table Salt · Other House Models
439 Downloads
94 Likes
267 Makes
Go to Model
Update: Model has been added and an updated print profile with a looser tolerance screw (0.475" instead of 0.493") has been added. This should fix any issues that have been happening regarding tolerance, if you are still having issues after trying the new looser tolerance print profile, please comment!I have left the original tighter tolerance print profile if you would like the print that, but be aware you probably need to size the screw down a percent or two, or tap the holder ½-13. Fully printed folding hook for your bag, headphones, or whatever else you want to hold from your desk or table!Can clamp onto objects up to 1.625 inches thick.Tested holding 10lbs without failure after 12 hours using PLA.Glue can optionally be added to the pad pin hole to hold the pin in permanently.
Category
Other House Models
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design · significant post-processing
Print-in-place Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA
Est. print time
12 h
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Does Adjustable Folding Hook need supports when printing?
Nope — Adjustable Folding Hook is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
How long does it take to print Adjustable Folding Hook?
According to the design notes, Adjustable Folding Hook takes approximately 12 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Adjustable Folding Hook available in?
Adjustable Folding Hook is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Adjustable Folding Hook free to download?
Yes, Adjustable Folding Hook is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Parametric Folding Hook
Parametric Folding Hook
by Biochem
↓ 26 ♥ 16
Hinged Folding Hook
Hinged Folding Hook
by deadpoint
↓ 15 ♥ 17
Magnetic folding Hook
Magnetic folding Hook
by nicohaider2
↓ 4 ♥ 1
Ikea KLYKET style folding hook
Ikea KLYKET style folding hook
by Doe0035
↓ 11 ♥ 4
Folding hook
Folding hook
by Netman
↓ 3k ♥ 1.3k
Folding Hook
Folding Hook
by Netman
↓ 769 ♥ 266
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection