Adjustable graphic card holder bracket AMD

Print per object is set in the profile. A support blocker is set on the threaded rod. The AMD needs the support, it takes 2 minutes to get the inside out nicely. You will need a large screwdriver, a small screwdriver and a small pair of pliers. Wait until the object cools down and be careful! The AMD is rotated 180 degrees on the Y axis, so the bottom becomes the front of the object, and so you don't see the seam in the middle of the rod as it is on the back. I have tested it, I have printed several pieces. Adjustable between 88 and 134 mm. If you like it, please give it a like and a drop a review if you printed it.