Thingiverse
Learning
Zum Modell
Adjustable locking arms for various uses.
23
Downloads
19
Likes
0
Makes
Video here: https://youtu.be/aZH75SxCcmM
An adjustable arm that locks in place with a twist. The string threaded through the joints is tightened to lock them in place, resulting in an articulated arm strong enough for most uses that can easily be 3d printed.
The Hand attachment is print in place.
3 M2 by 20mm (ish) screws are used to attach the handle to the ratchet gear and provide reinforcement. One or two smaller M2 bolts and nuts can be used to attach the ratchet locking arm to the body.
Custom joints can be created by adjusting two parameters (length and angle) in the f3d backup file.
Different attachment mechanisms can be easily swapped with printed M14x2 threads offset 0.2mm inwards, though tolerances are printer-dependent.
An adjustable arm that locks in place with a twist. The string threaded through the joints is tightened to lock them in place, resulting in an articulated arm strong enough for most uses that can easily be 3d printed.
The Hand attachment is print in place.
3 M2 by 20mm (ish) screws are used to attach the handle to the ratchet gear and provide reinforcement. One or two smaller M2 bolts and nuts can be used to attach the ratchet locking arm to the body.
Custom joints can be created by adjusting two parameters (length and angle) in the f3d backup file.
Different attachment mechanisms can be easily swapped with printed M14x2 threads offset 0.2mm inwards, though tolerances are printer-dependent.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
